*click to enlarge

1/16" aluminum, with gasket to seal the box against the hood. Picture above shows installed version.  Picture below is the production version:

   Production version installed: 

	Works great with aftermarket cone-type filters.
	Works with turbo or non-turbo 2nd Gen (86-91) RX-7's
	Designed to work with the GregW (www.teamfc3s.org member)  headlight cover ducts--ensures that your engine receives a cold air supply.
	$60 (includes shipping) in the lower 48 states.
	Payment method:  Paypal (vkrolak@bex.net)  or Money Order only. Airbox will be shipped when payment is received.
	Please include whether or not you want the air filter hole pre-cut.  If you want the hole pre-cut, please include the diameter of the AFM adapter and the diameter of the air filter at it's widest point (this is so I can center the adapter in the airbox).  I usually drill a 3" hole for S4 FC's (86-88) and a 3.5" hole for S5 (89-91) FC's.
	NOTE--There are now two versions of the airbox.  The first is a 'standard' design (pictured above) that will work with various aftermarket airfilters (K&N, Bonez Intake Kits, Apex'i kits).  The second kit is a narrow box designed to fit lower in the car for the HKS SuperMegaFlow intake.  Please specify which model you want.
	What you'll need to install it:  Your aftermarket cone-filter brackets which currently support your AFM and filter.  These brackets will also support the airbox.
	If you have any questions, please contact me.
	Customer Cars: